Precious wood jian hilt

Here a few pictures of the previous jian hilt. This hilt was made later than the blade, and is of a fairly rustic manufacture. It is difficult to the age of the blade, but given the amount of polishing it has had, I would estimate it to be mid-Qing or earlier. This is a well forged blade that has obviously been treasured, and has been re-hilted with precious wood, probably in the late Qing. The wood is very dense and very hard, and is most likely to be a Huali, but if anyone can positively identify it, I would be most grateful.

Huang huali wood?

The brass guard is ellipsoid in shape, and has been made from two pieces: a flat piece forming the body of the guard, and a strip bent around to form the rim. The picture below shows the join where the two pieces were brazed together, and also shows the diagonal scarf joint in the rim. The ferrule was formed from one strip of brass. The strip was bent to shape leaving an overlap and then the overlap was brazed.

The wooden pommel was made from one piece and the wooden grip was made in two halves. The grip sections may originally have been glued together. There is now a visible gap between the sections of the grip. This has been caused by corrosion of the tang forcing the sections apart.

The brass ferrules help to bind the two sections of the grip together and the decorative end cap serves to keep the pommel securely in place.

Carved decoration on the pommel cap

Not only is the hilt beautifully designed and very nicely made, it is also extremely comfortable to use.